FLEX™
GLAZED CERAMIC WALL TILE
Description
Flex™ captures the essence of subway tile for unique vertical installations. A variety of tile sizes guide timeless neutrals across walls and surfaces. The series is available in matte and glossy finishes for an array of aesthetics.
Technical Specifications
5 Colors | 4 Sizes
Technical Specifications
| Nominal Size (in.) |
4 x 16
|
4 x 10 | 6 x 6 | 3 x 6 |
| Edge Detail | Pressed | Pressed | Pressed | Pressed |
| Finish |
Matte / Glossy
|
Matte / Glossy | Matte / Glossy | Matte / Glossy |
| Faces | 1 | 1 | 1 | 1 |
| Thickness (in.)* | .30" | .30" | .30" | .30" |
| Lbs/PC | 1.25 | 0.70 | 0.60 |
0.30 |
| Grout Joint Recommendation (in.) | 1/16*** | 1/16*** |
1/16***
|
1/16*** |
* Tile thickness could vary based on size. Larger format tiles will have a higher thickness.
**TIP ( Testing is in progress, and results will be available soon.)
***Additional Grout Recommendations: 1/16” unless an offset is used. 1/8” when used in a staggered pattern, overlap not to exceed 33%
Testing
| Method | Results |
| Abrasion Resistance C1027 | TIP** |
| Breaking Strength C648 | >125 |
| Chemical Resistance C650 | Resistant |
| Water Absorption C373 |
<20.0% |
| DCOF AcuTest WET | TIP** |
| Crazing Resistance C424 |
Resistant |
| Scratch Hardness MOHS | TIP** |
| Shade Variation |
V1 |
* The beauty of high gloss or polished products may be susceptible to scratching that is more visible on the surface of the tile.
**TIP ( Testing is in progress, and results will be available soon.)
Download and View SDS
Download and View HPD
Download and View LEED
Download and View Care and Maintenance
Sizes and Trim
4” x 16”
4” x 10”
6" x 6"
3" x 6"
4" x 16" Wall Single Bullnose
2" x 6" Wall Single Bullnose
4" x 4" SBN Corner
2" x 2" SBN Corner
1" x 6" Quarter Round
Usage
| USAGE TYPES: | YES/NO |
| COMMERCIAL FLOOR* | No |
| RESIDENTIAL FLOOR | No |
| RESIDENTIAL AND COMMERCIAL WALL | Yes |
| SHOWER WALL | Yes |
| SHOWER FLOOR | No |
| STEAM SHOWER | No |
| KITCHEN COUNTER | Yes |
| STOVE AREA | Yes |
| FIREPLACE FACADE | Yes |
| COVERED EXTERIOR WALL FREEZING CLIMATES | No |
| COVERED EXTERIOR WALL NON-FREEZING CLIMATES | No |
| UNCOVERED EXTERIOR WALL FREEZING CLIMATES | No |
| UNCOVERED EXTERIOR WALL NON-FREEZING CLIMATES | No |
| COVERED EXTERIOR FLOOR FREEZING CLIMATES | No |
| COVERED EXTERIOR FLOOR NON-FREEZING CLIMATES | No |
| UNCOVERED EXTERIOR FLOOR FREEZING CLIMATES | No |
| UNCOVERED EXTERIOR FLOOR NON-FREEZING CLIMATES | No |
| POOL DECK | No |
| POOL WATERLINE | No |
| INSIDE POOL | No |
| SPA / HOT TUB | No |
| UV/ SUN EXPOSURE SENSITIVE | No |
* Emser recommends a .50 or greater DCOF for Commercial Dining Floors.
**TIP ( Testing is in progress, and results will be available soon.)
The usage chart is provided as a general guide only. Actual job site conditions may change a product’s suitability for a specific application. If special conditions apply, please contact an Emser representative for clarification of use prior to purchasing.