BUILDING BLOCKS™ METAL
The Building Blocks™ Metal line strikes a harmonious balance between industrial chic and modern luxury. The rich colors are reminiscent of iron, bronze and steel and provide sophisticated elegance to any application. This porcelain tile is sure to bring any room to life.
DESIGNED IN COLLABORATION WITH GENSLER™ AS PRODUCT DESIGN CONSULTANT
3 Colors | 2 Sizes
|Nominal Size (in.)||12 x 24; 24 x 47|
|Faces||12 x 24: 24
24 x 47: 6
12 x 24: 8.0
24 x 47: 35.0
|Grout Joint Recommendation||1/8"|
* Tile thickness could vary based on size. Larger format tiles will have a higher thickness.
|Abrasion Resistance C1027||IV|
|Breaking Strength C648||>500 LBF|
|Chemical Resistance C650||Resistant|
|Water Absorption C373||
|DCOF AcuTest WET||>0.60|
|Scratch Hardness MOHS||6|
Download and View Care and Maintenance
Sizes and Trim
|COMMERCIAL FLOOR WET*||YES|
|COMMERCIAL FLOOR DRY*||YES
|RESIDENTIAL AND COMMERCIAL WALL||YES
|RESIDENTIAL SHOWER FLOOR
|COMMERCIAL SHOWER FLOOR
|EXTERIOR FLOOR (NOT POOL)||NO
* Emser recommends a .50 or greater DCOF for Commercial Dining Floors.
The usage chart is provided as a general guide only. Actual job site conditions may change a product’s suitability for a specific application. If special conditions apply, please contact an Emser representative for clarification of use prior to purchasing.