Tiles (Gloss Finish)
Blanc 4.25" X 4.25", 3” x 6”	Crystalline 4.25" X 4.25", 3” x 6”	Cielo 4.25" X 4.25", 3” x 6”	Ocean Mist 4.25" X 4.25", 3” x 6”
Azul Royale 4.25" X 4.25", 3” x 6”	Cascade 4.25" X 4.25", 3” x 6”	Billiard Green 4.25" X 4.25", 3” x 6”	Soft Mauve 4.25" X 4.25", 3” x 6”
Mulberry 4.25" X 4.25", 3” x 6”	Honey 4.25" X 4.25", 3” x 6”	Sunflower 4.25" X 4.25", 3” x 6”	Empire Gold 4.25" X 4.25", 3” x 6”
Amber 4.25" X 4.25", 3” x 6”	Cinnamon 4.25" X 4.25", 3” x 6”	Ruby 4.25" X 4.25", 3” x 6”	Morning Fog 4.25" X 4.25", 3” x 6”
Pewter 4.25" X 4.25", 3” x 6”	Noir 4.25" X 4.25", 3” x 6”
Mosaics (Gloss Finish)
Blanc 1" X 1" on 12.5" x 12.5" mesh	Crystalline 1" X 1" on 12.5" x 12.5" mesh	Cielo 1" X 1" on 12.5" x 12.5" mesh	Ocean Mist 1" X 1" on 12.5" x 12.5" mesh
Azul Royale 1" X 1" on 12.5" x 12.5" mesh	Cascade 1" X 1" on 12.5" x 12.5" mesh	Billiard Green 1" X 1" on 12.5" x 12.5" mesh	Soft Mauve 1" X 1" on 12.5" x 12.5" mesh
Mulberry 1" X 1" on 12.5" x 12.5" mesh	Honey 1" X 1" on 12.5" x 12.5" mesh	Sunflower 1" X 1" on 12.5" x 12.5" mesh	Empire Gold 1" X 1" on 12.5" x 12.5" mesh
Amber 1" X 1" on 12.5" x 12.5" mesh	Cinnamon 1" X 1" on 12.5" x 12.5" mesh	Ruby 1" X 1" on 12.5" x 12.5" mesh	Morning Fog 1" X 1" on 12.5" x 12.5" mesh
Pewter 1" X 1" on 12.5" x 12.5" mesh	Noir 1" X 1" on 12.5" x 12.5" mesh
Mosaic Blends (Gloss Finish)
Crystalline / Cascade 1" X 1" on 12.5" x 12.5" mesh	Ocean Mist / Crystal 1" X 1" on 12.5" x 12.5" mesh	Amber / Honey 1" X 1" on 12.5" x 12.5" mesh	Mountain Mosaic Blend 1" X 1" on 12.5" x 12.5" mesh
Harvest Aglow 1" X 1" on 12.5" x 12.5" mesh	Pewter / Morning Fog 1" X 1" on 12.5" x 12.5" mesh	Amber / Mulberry 1" X 1" on 12.5" x 12.5" mesh	Checker Mosaic Blend 1" X 1" on 12.5" x 12.5" mesh
Mosaic Blends (Stone and Glass)
Ambrato 5/8" x 5/8" on 12" x 12" mesh	Murano 5/8" x 5/8" on 12" x 12" mesh	Puntini 5/8" x 5/8" on 12" x 12" mesh	Regale 5/8" x 5/8" on 12" x 12" mesh
Romano 5/8" x 5/8" on 12" x 12" mesh	Tromba 5/8" x 5/8" on 12" x 12" mesh	Venezia 5/8" x 5/8" on 12" x 12" mesh	Vetro 5/8" x 5/8" on 12" x 12" mesh
Zanfirico 5/8" x 5/8" on 12" x 12" mesh
Mosaic Pattern Blends (Stone and Glass)
Ambrato 13" x 13" mesh	Murano 13" x 13" mesh	Puntini 13" x 13" mesh	Regale 13" x 13" mesh
Romano 13" x 13" mesh	Tromba 13" x 13" mesh	Venezia 13" x 13" mesh	Vetro 13" x 13" mesh
Zanfirico 13" x 13" mesh
Mosaic Pattern Blends (gloss finish)
Aventura 13" x 13" mesh	Emisfero 13" x 13" mesh	Fazzoletto 13" x 13" mesh	Filigrana 13" x 13" mesh
Leggero 13" x 13" mesh	Millefiore 13" x 13" mesh
Linear Mosaic Blends (Stone and Glass)
Ambrato 13" x 13" mesh	Murano 13" x 13" mesh	Puntini 13" x 13" mesh	Regale 13" x 13" mesh
Romano 13" x 13" mesh	Tromba 13" x 13" mesh	Venezia 13" x 13" mesh	Vetro 13" x 13" mesh
Zanfirico 13" x 13" mesh
Liners
Blanc 1” x 8.5”	Crystalline 1” x 8.5”	Cielo 1” x 8.5”	Ocean Mist 1” x 8.5”
Azul Royale 1” x 8.5”	Cascade 1” x 8.5”	Billiard Green 1” x 8.5”	Soft Mauve 1” x 8.5”
Mulberry 1” x 8.5”	Honey 1” x 8.5”	Sunflower 1” x 8.5”	Empire Gold 1” x 8.5”
Amber 1” x 8.5”	Cinnamon 1” x 8.5”	Ruby 1” x 8.5”	Morning Fog 1” x 8.5”
Pewter 1” x 8.5”	Noir 1” x 8.5”

APPLICATIONS
Appropriate for interior walls and backsplashes and exterior walls and backsplashes in non-freezing temperatures. Not recommended for countertop or floor use. Always follow proper installation methods. Installing glass tile involves some basic procedures that differ from installing ceramic or stone tile. Following these procedures will prevent simple mistakes that could result in the failure of the installation. *Make sure that glass tile is installed over the proper substrate. This is one of the most important factors in ensuring a good installation. When cutting glass, it is recommended to use a supreme diamond blade designed for chip free cutting of glass (wet only).

Approved substrate surfaces:
Fully cured concrete substrate
Properly installed cement backerboard

Do not install glass tile on: Particleboard, Chipboard, Masonite, Press wood, Plywood, Asbestos boards

To avoid adversely affecting the color of glass tile, white thin set is required for all installations. Glass tile must have a minimum of 1/8” grout joint and should not be butt set. To ensure adequate coverage and full contact to the tile it is recommended to lightly back butter the tile. Back buttering is required for semi-transparent glass tile. Use a glass cleaner and a soft lint free cloth for cleaning glass tile. To remove soap scum or water deposits, use a minimally abrasive cleanser and soft bristle brush.